Below you can find a list of various 3D printable files to use as you like. If you’re unfamiliar with 3D printing or don’t have a friend with one, feel free to reach out and we can figure out how to get you any of the parts below.
–
Happy printing.
Cleanliness Caps:
Radiator Hose Caps (fits thermostat housing and radiator end tank necks)
AEM Boost Gauge Sender Holder
I used this to mount my SC boost sender to the main harness wiring at the firewall (reprinted in black)
DBG Dewalt 20V MAX XR Blower Shorty Nozzle
I bought this blower (DCBL722P1) to expedite car wash drying and needed a short nozzle for it, attaches like the original part.
Bench Top DME Flasher Project Box
I made a project box to house the wiring for a benchtop flashing setup for the MS41 DME. The write-up can be found over here. The shared files are updated a bit from what is pictured but more or less the same as seen.
Z3M autodim mirror casing repair tabs
If you disassemble your autodim Z3M mirrior theres nearly 100% chance one (likely most) of the tabs will break and the parting joint will become loose. These tabs can be glued to the casing to restore function or reinforce existint/partially broken tabs. 
Z3 door card repair parts
If you need new melt studs for your leather inserts or the tabs for the window triangle trim piece, the print files are available below.
Insert Repair stud
Window triangle trim clip
Double Bee Garage 
Leave a comment