Double Bee Garage

Engine:

• Eurosport 2.1L Twinscrew
• Aquamist HFS-3 WMI system (0.9mm single jet)
• Kenne Bell overdrive pulley 4.5″ (10.4 psi)
• Modified nose drive shaft and vented pulley bolt
• Eurosport air intake carbon heat shield
• Bosch (Porsche) “803” MAF (0 280 217 803)
• aFe 3.5″ Cone filter (21-91090)
• Rally Road M50 Silicone Trottle Body elbow (modified)
• Rally Road M50 manifold ICV silicone hose (long tube only)
• RE underdrive WP & PS pulleys
• S54 Oil Filter Housing
• Randy Forbes S54-S52 Vanos feed adapter block
• Bespoke DBG designed adapter for oil pressure/oil temp sensors
• Wired oil pump nut
• Bimmerworld performance engine mounts
• ECS 8oz catch can
• Radium Engineering PCV Valve
• Radium Engineering Valve cover PCV to 10AN adapter
• -10AN/-6AN nylon braided PCV hoses
• Aluminum adapter plate for -6AN ORB fitting for PCV vacuum line
• Eurosport base “tune” (tweaked)
• Lava shield wrapped box
• Throttle body coolant line delete
• ACS-TB delete
• Magnetic Oil drain plug

Electronics:

• RaceTCS traction control
• AEM (30-0301) oil pressure gauge
• AEM (30-0302) head water temp gauge
• AEM (30-0302) oil temp gauge
• AEM (30-0300) Wideband gauge
• AEM (30-0306) Boost gauge
• AEM (30-0301) fuel pressure gauge
• AEM (30-2500) AQ-1 Data logger
• AEMnet custom wire harness
• Relocated Diagnostic (D110) “Pacman” connector
• Relocated 12V+ Tower
• Relocated Ignition coil harness plug
• Relocated Passenger side relays to inside DME box

Fueling:

• Walbro GSS342 in tank fuel pump
• Radium engineering fuel pump intake filter/sock (14-0743)
• Delphi 37lb/hr injectors (D3165BA)

Cooling:

• Zionsville Autosports Type 2 radiator
• Zionsville bespoke radiator puller shroud
• 14″ SPAL puller fan (IX-30102041) wired to OE pusher relays
• 14″ SPAL pusher fan (IX-30102056) wired to custom harness using added OEM relays/triggers
• S50B32 Euro expansion tank retrofit
• Eurosport oil cooler -10AN fitting adapter block
• Zionsville Autosports bespoke oil cooler (19×2.5×2.5)
• -10AN nylon braided oil cooler lines
• Stewart Water Pump (mechanical fan threads removed)
• Aftercooler circulation pump (Johnson pump 10-24504-03)
• Air to water heat exchanger (24x5x2.5)
• -12AN nylon braided aftercooler lines

Exhaust:

• Long tube headers coated in CERAKOTE Piston Coat
• Custom 3″ midpipe
• GESI 3″ high-flow cat
• Vibrant 3″ resonator
• V-banded from 2-1 merge to axlebacks
• Super Sprint cat-backs
• N54 exhaust manifold studs
• SAP Delete

Drivetrain:

• Mason clutch pedal
• Oilite clutch pedal bushing
• Rogue Engineering Trans mounts
• Shifter bushings refreshed
• Delrin shifter carrier bushing
• Sach’s Clutch/PP/throw out bearing kit
• Brass clutch fork pivot pin
• Shift pin service
• Amsoil Trans Fluid change
• Rogue SS clutch line replacement (DCV delete)
• OE Slave cylinder

Suspension:

• GC Coilovers (440f/700r)
• GC Hybrid camber/caster plates
• Meyle HD FLCAs
• Powerflex offset FLCABs
• Lemforder inner/outer tie rods w/ fresh boots & locking plates
• OEM front strut reinforcement plates (modified for GC camber plates)
• Bimmerworld weld-in eccentric rear toe/camber adjusters
• AKG poly subframe bushings
• Turner Motorsports “Street” rubber RTABs
• Mason Engineering Racebrace

Brakes:

• Zimmermann 2-pc OE “euro” floating front rotors
• Zimmermann vented OE rear rotors
• Axxis pads
• Ireland Engineering SS brake lines
• Motul 600 fluid
• Overhauled rear calipers (OE softparts, painted)
• Bimmerworld SS caliper pistons (rear)
• Delrin brake pedal bushing

Interior:

• 50% ceramic tint on sunroof
• DBG seat tilt kit (driver & passenger)
• Seat bushing replacement
• 12V Sky ///M plug
• Viper 3202 2-way alarm w/ OEM siren & OEM Alarm harness spliced for plug-n-play
• (Remote functions: Keyless entry, window roll up/down, hatch pop)
• ZHP shift knob
• Passenger side “parcel net” replaced
• LeatherZ armrest
• Refreshed center console
• LeatherZ sunroof sunshade (Suede applied)
• LeatherZ footwell lighting
• AEM AQ-1 Data logger
• Euro driver lower dash panel
• Euro glovebox
• Black Flocked Center dash
• Extended leather door cards and dash pods
• Suede headliner & A/B/C pillar
• “BMW Individual” door sills
• Shepott E46 sport steering with with radio steering wheel controls
• Euro sun visors (NO airbag labels)
• Redline Goods Alcantara Shift and e-brake boots with M-tristitch
• Redline Goods Leather ebrake handle with M-tristitch
• Homelink garage door opener retrofit to modified fog switch
• Colourlock leather restoration for seats and center console
• FIXED driver seat back rock, identified as seat pan busted spot welds
• 3D printed rearview mirror high mount (aluminum in process)
• Rallyroad 52mm dual gauge pod mount
• Custom fiberglass/upholstered A-pillar dual gauge mount
• DBG High tuck rear view mirror mount V2
• DBG dead pedal reinforcement block

Exterior:

• Aluminum Motion Motorsports undertray
• OEM gloss black painted hatch spoiler
• Color matched Garagewelt wiper delete
• Skeene design front license plate bracket (currently removed for ESTS HE flow)
• OEM shorty antenna
• OEM S54 belly pan cover
• Neverdone Hex grill insert

Wheels & Tires:

• APEX ML-10RT 18×9 ET30 fronts 18×11 ET18 rears (including 7mm spacer, currently) in Brushed Silver
• APEX 90mm wheel studs
• Motorsports Hardware lug nuts /w locks
• Yokohama ADVAN Neova AD09’s 255/35F 295/30R

Lighting:

• Euro clear bumper marker lights
• Stealth bulbs all around
• LED 3rd brake conversionv2.0
• 3rd brake light accelerometer flasher module
• LED license plate bulbs
• FX-R 3.0 2.5″ projector retrofit v2.0
• Skyy FX-R 3.0 brackets

Stereo:

• Pioneer DEH-80PRS Headunit
• Alpine PDX M12 Monoblock amp
• Alpine PDX F4 4channel amp
• Focal ES 130K K2 Component front speakers
• Focal Performance 100AC rear speakers
• Dual JL Audio 6W3v3 subs in custom fiberglass sub box
• Alpine bass knob
• E46 Steering wheel control retrofit
• Niche Motorsports USB plug with 12V switched power & HU port
• 16Ga speaker wire throughout
• 12Ga Sub wiring
• JL Audio RCAs

Misc:

• Windshield washer bottle relocation to M-mobility kit well in trunk
• Minor Noico sound deadening mat/foam application
• Programmable intermittent wiper module (BMW PN: 61.35-8 369 474)